Configuration of NFC tags

How do I set up NFC tags?

NFC tags can be tested and set up through the CleanManager app by the administrator or a supervisor.

Note:

If you can not choose the customer, make sure that you are affiliated to the area, where the customer is located. Contact your administrator to link you with a customer area in CleanManager:
Company structure > Customer areas

If you are unsure about whether a NFC tag is paired with another customer, then read the article: Test of NFC tags

In this article, you can read about how to register a NFC tag to a customer location:

• How do I set up a NFC tag to a customer location?

---

How to set up a NFC tag to a customer location

	Open the CleanManager app
	Click on Create NFC tag
	Choose a customer, to set up a tag for the desired customer
	Or choose a customer and a location (if multiple locations are associated with the customer)
	Click on Scan NFC tag
	Or click on the comment section to add a comment about where the tag was installed
	Scan the NFC tag by moving the phone over the tag
	The NFC tag is now registered in CleanManager and can be mounted at the location.
	You can set up several tags by clicking on Register another NFC tag or click the button Back to main page to exit

Note:

All registered NFC tags will be saved in CleanManager and can be accessed here:
Check-in > NFC tag administration
If you would like to know how to delete registered tags again, read the article: Deleting NFC tags